Rotary Evaporator can be rotated under constant temperature heating and under negative pressure to form a film, evaporate efficiently, and then condense and recover the solvent. It is especially suitable for the concentration, crystallization, separation and solvent recovery of heat sensitive materials. Some models can also be used for reflux extraction. It is one of the basic instruments necessary for the chemical industry, pharmaceutical industry, universities and research laboratories. And the main means of extracting and concentrating in the analysis experiment. 50L Laboratory Rotary Evaporator with Chiller and Vacuum Pump, 220V Optimum ambient temperature (c):5～35Working power supply (V/Hz):220V/50HZMain engine speed (RPM):20～110Rotary electric machine (W):Brushless 250Temperature control (c):Digital display temperature control, room temperature -99Rotating bottle (L): Fifty Flange 125Recovery bottle (L):20 50L Laboratory Rotary Evaporator with Chiller and Vacuum Pump, 220V Evaporation capacity (L/h):The water is more than 9,Alcohol is more than 19Water bath pot material:stainless steelWater bath pot size (mm): Φ550×320 Lifting function: Electric + hand lift Lift stroke (mm):0～180 Whole power (Kw):4.0 (220-240V) Vacuum Pump Power supply(V/HZ):220V/50HZPower(W):370Flow(L/min):80Lift(m):12Body material:1Cr18Material:static sprayingMax. pressure (M Pa):0.098Sucking Rate for Single Tap:10L/minQuantity of tap (Pcs):5Tank Capacity:50L Chiller Voltage:220V 50/60HZStorage Volume: 50LNo load minimum temperature:-32℃Refrigerant capacity: 7549-3540WFlow:30L/minLift:10-12m Safety Instruction Please connected properly ( see technical parameters ) , and ensure a good groundingWork , cooling water pipe and exhaust pipe should be kept unobstructed , no dead corner .The glass component installation pipeline , should adopt push installation , so as not to damage the glass partsThe use of flammable materials or organic solvents , please dont let the solution splash overflow , away from the fire and ready to take emergency measures .Cleaning stubborn stains on the glass device , wipe clean with a rag Safety Instruction Please connected properly ( see technical parameters ) , and ensure a good groundingWork , cooling water pipe and exhaust pipe should be kept unobstructed , no dead corner .The glass component installation pipeline , should adopt push installation , so as not to damage the glass partsThe use of flammable materials or organic solvents , please dont let the solution splash overflow , away from the fire and ready to take emergency measures .Cleaning stubborn stains on the glass device , wipe clean with a rag
