**Vacuum Bagging Starter Kit for Resin Epoxy Infusion - 5x8 ft Poly Fabric (40 sq ft), 3 Gauge Brass Connectors, 5 ft Vacuum Hose - Perfect for DIY Boat Repair, Composite Layup & Woodworking Projects**

Vacuum Bagging Supply: Starter kit::bag material, vacuum gauge, hose, and all the nipples needed Features: 5 Ft Thick-walled vacuum hose(1/2 ID 3/4 OD), will not collapse under deep vacuum, no restriction to vacuum flow.Barbed adapter to 3/8 flare pump port, 5 linear ft, cut out of 8 ft 4 inch roll, double order will receive a 2X 5 feet piecesComes with Vacuum Connector/nipple 1/2 Barbed X 3/8 NPT with locking nut and the sealing washersBagging material: 5ft by 8ft 4 inch, 6 Mil thick and punch resistant, stretchable, heat stable, tolerant to pressure and vacuum.Vacuum Gauge: large and easy to read 0 to -30 inch Hg, with 1/4 FFL X 1/4 MFL X 1/8 FNPT brass adapter to connect to pump 3/8 flare port (1/4 flare adapter available, simply ask if your pump only has a 1/4 port).Recommended Deep Vacuum Pumps (sold separately): VPD6 Or, VPD12a depending on your bag size. Packing List: Vacuum hose: 5 ft, one piecePoly-fabric, Made in the USA, 60 inches X 100 inches, one pieceBrass Adapter: 3/8 FFL X 1/2 Barb, one unitVacuum Connector: 1/2 Barb X 3/8 NPT with locking nut and sealing washers (comes assembled)Vacuum Gauge: 1 unitBrass Tee Adapter: 1/4 FFL X 1/4 MFL X 1/8 FNPT, 1 unit

Vacuum Bagging starter Hardware KitPoly Fabric 5X8 Gauge 3 Brass Connector/Adapter Hose

5 Ft vacuum hose(1/2 ID 3/4 OD), will not collapse under deep vacuum, no restriction to vacuum flow.

with 3 adapters including the vacuum nipple to bag for tight seal for easy set up and connection to pump

Bagging material 5ft by 8ft 4 inch, 6 Mil thick and punch resistant, stretchable, heat stable, tolerant to pressure and vacuum.

Vacuum Gauge Large and easy to read 0 to -30 inch Hg, with 1/4 FFL X 1/4 MFL X 1/8 FNPT bradd adapter to connect to pump 1/4 port.