This tool is intended to be operated as a handheld tool and is air-powered. It requires an air compressor that will provide a clean lubricated air supply with an airflow rate of 17 standard cubic feet per minute (SCFM), or 481 liters per minute (LPM)( About 4.6 KW silent air compressor), and 90 pounds per square inch (psi) at the tool, i.e. the point where the air hose is connected to the tool, when the tool is running with the level fully depressed. Recommended is an approved 3/8 inch (10 mm) airline at the minimum length required for the application, with a maximum length of 25 feet (8 m). For more details about connecting the tool to your air supply, see the Instruction Manual. StrongTools random orbital sanders optimize sanding and surface preparation on wood, metal, fiberglass and composite materials, and many other substrates. Also known as dual action palm sanders, these industrial-grade tools rotate the abrasive disc and disc pad in two simultaneous overlapping oval patterns so no single abrasive particle follows the same path twice, producing a random scratch and swirl-free finish ready for paint or varnish. The integrated regulator can achieve speed control of 10,000 rpm, high horsepower, high balance, and long-term use without fatigue. High-precision all-steel movement, manufactured by quenching, all-steel rotor, all-steel cylinder, and high-hardness fan blade movement closely match the speed, not easy to damage! The hardened rotor makes it stronger, high-strength and wear-resistant blades, durable, strong grinding force and long service life! Speed control switch: the speed can be adjusted according to the needs of your work. Intake port: comes with a filter screen to effectively prevent foreign objects from entering and damaging the machine. Push-type switch: The switch adopts a push-type design, which can be activated by gently pressing in the hand. Connect one end of the suction tube to the suction connector, and tie the other end to the bag that collects the dust to use. The 1 meter vacuum tube is very practical and convenient to use, Whether it is used in the workshop or at home. Suitable for: Ideal for producing fine finishes on wood, metal, fiberglass and other compound materials, etc. Providing high-quality finish in auto body and woodworking. Removing and mounting sanding pad 1. Disconnect air line from sander. 2. Remove old back-up pad from sander by inserting the wrench, supplied with the tool,between the rubber shroud and the back-up pad. Use the wrench to secure the sander spindle while turning the back-up pad counter clockwise. 3. After the old back-up has been removed from the sander, inspect the threaded hole in the spindle to ensure that the threads are free of debris and undamaged. 4. Ensure that the phenolic washer is in place around the threaded shaft of the new back-up pad. 5. Secure the sander spindle with the wrench and tighten the new back-up pad securely to the tool. Package Included 1 x Air Sander1 x Quick Connector1 x Wrench5 x 5in. Sandpaper5 x 6in. Sandpaper1 x TeflonTape1 x User Manual1 x Dust Pipe1 x Dust Bag Specifications Body Material: Aluminum Alloy Sanding Pad: 5 inch or 6 inch Free Speed: 10000RPM Pendulum Diameter: 1/4" Working Pressure: 6.3bar
